| BB-HCM311A |
$407.00 |
||
| Panasonic Indoor Pan and Tilt Network Camera with 2-way audio. Now with 10x digital zoom and motion detection. Includes mounting bracket. 30FPS | |||
| |||
 |
|||
| IPv6 Network Camera Audio 2-way Communication (Walkie-talkie Type) (IPv4 Only) Better Image Qualityt Various Camera Control Features SD Memory Card Recording Enhanced Multi-Camera Page Supporting Viewnetcam.com service Multi-Language Display IPv6(*1 )Network Camera Your Panasonic Network Camera supports IPv6 (Internet Protocol Version 6), IPv6 was created to address the additional IP addresses that will be needed as the Internet continues to expand. Since the camera also supports IPv4 that's currently used, it is "dual stack" design will seamlessly operate while IPv6 is phased in. For more information in IPv6 you wish to visit http://www.ipv6.org/. See page 13 for more information. Audio 2-way Communication(*2 )(Walkie-talkie Type) (IPv4 Only) Your Panasonic Network Camera now provides 2-way audio, between the camera and your PC. You will be able to hear the person on camera and respond using a microphone connected to your PC's sound card (customer-provided.) They will hear your response through the amplified speaker (customer-provided) connected to the camera. The audio feature uses a JavaTM applet that is installed during the installation procedure. For example, the camera can be used in the following various locations: - In the baby's room, to hear if the baby is crying. - At the front door, to see and hear who is at the door. - In the children's play room, to see and hear if they are safe. Note PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This device should be used only in compliance with all applicable federal, state and local statutes. Better Image Quality The CCD sensor and the color night view mode provides better image quality and low light performance. - The CCD sensor gives you clear image. - You can monitor live video (Motion JPEG) that refreshes its image 30 frames per second. - Color night view mode allows you to monitor the camera in low illuminance. Various Camera Control Features The camera pans or tilts fast in maximum 80 ° per second. (The previous model: 21 ° per second) You can control the camera at high speed from your PC or mobile phone. Alarm position feature also allows the camera to automatically turn the lens to the alarm position. Additionally, the following control features are available to easily and quickly monitor the camera. SD Memory Card(*3 ) Recording The camera has an SD memory card slot. You can record camera images to the SD memory card. If you enable alarm buffer/transfer, you can record the image at the timing of signal detection of door sensor or light. About 58,000 images (320 x 240 resolution and standard quality) can be recorded to 1 GB SD memory card. If you enable 1-minute interval timer buffer/transfer, you can record the images for about 42 days. Enhanced Multi-Camera Page Multi-Camera page displays up to 4 cameras while supporting each audio 2-way communication. The previous model displays only 4 cameras, but this camera can switch 3 sets of 4 cameras. Additionally, the camera can displays maximum 12 cameras on a page in a static image.. Supporting Viewnetcam.com service Viewnetcam.com service allows you to access the camera over the Internet with your favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP address. For more information on Viewnetcam.com service, Please access www.viewnetcam.com for more information. Multi-Language Display Top page, Single Camera and Multi-Camera page can be displayed inEnglish, French, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. The Setup, Maintenance and Support pages are displayed only in English or Japanese. Click to Center When you click a certain point on the camera image, the point is centered on the image.< |
|||